Hi Folks, today I come across an issue.

I could not use the 1-Elevon 1-Flaps configuration while mixing from CH6 to CH5 to allow my second Flaps servo to operate correctly. After several minutes of testing I checked the servo-graphs in the mixer, the mixer did not really pick up the signal from CH6 from the Phasetrim subroutine, a software bug.

So I quickly reconfigured and made my own phasetrim configuration for flaps:

Changing 1QR 1WK to 1QR (Eliminating predefined Mixer)
Setting Phase Control on Button (for Voice and Displayannouncements)
Configuring Free Channel to get Input from Switch
Reversing One of the Channels to have the same config/curve to avoid confusion
Create Free-Mixer 1 and 2 to input CH7 into CH5 and 6
Adapting Servo-Linear-Curve to Button-Inputs in a V-Shape (Low-Side is BTN4 and High-Side is BTN5 mapped through E7)
Adapting Servo-Linear-Curve to Button-Inputs in a V-Shape (Low-Side is BTN4 and High-Side is BTN5 mapped through E7)

Video (German):